LineGrip G5 In stock

229,00€tax incl.

The piece to remove your pulley system off your slackline. And set several lines with only one pulley system.

The LineGrip is a revolution in the slackline universe.

The long awaited 5th Generation lineGrip is finally here !

Even easier and safer to use thanks to the new SBR technologie, more versatile and reliable, lighter, tougher, oh, and a new design, better than all its predecessors.

It allows a slackline setup without having to leave your pulley system on.

Advantages :

- no more too short or too long pulley system left on
- no excess weight, you can enjoy all your webbing length.
less parts so less weakness in your setup.
- pulley system free for a second line.
- retainer clip

The retainer, or more specifically, the “plate retainer”, is the mechanism, that secures the loose clamping plate from inadvertently unlatching, which would send the lineGrip falling off the line.

When there’s a load at the load eye, this is not an issue, for the hooks are closed. Hanging free, however, the hooks open and a shaking line could cause the plate to unlatch.

Inadvertent unlatching could also occur, when repositioning the lineGrip, if no retainer is installed.

Tips :

  • You can add a Lasso/Soft Release system on one of the banana* to unset easily without re-set the pulley system on the line. Be careful to not to unscrew the pine from the shackle during handling.

*check the compatibilities

  • 1 LineGrip G5 maximum working load 15 kN
  • LineGrip G5 : Spring Ball Retainer (mechanism that secures the loose clamping plate)
  • LineGrip-Shell (protection & cooling)
  • Instruction manual (only EN)
  • 2 Spare lineGrip safety caps

LineGrip G5 (5th Generation)

Weight: 418g
Measurements L x H x W: 162 x 84 x 45 mm
Size Load Eye (front) 29 x 18 mm
Diameter Link Eyelet (rear) 14 mm
Material Clamping Plates Aluminum 7075-T651
Material Mechanics: Aluminum 7075-T651 (load bolts inox)
Material Rubber Coating: T3-Rubber on aluminum carrier plate
Safe Working Load (SWL): 15 kN
Common Slipping Threshold (CST): ~ 30 kN
Minimum Breaking Strength (MBS): 45 kN
Operating Temp: -10° C to +40° C
Approved Webbing Width: 24 mm - 26 mm
Approved Webbing Thickness: 1 mm - 5 mm

Made in Germany

Recommandations :

Only for 25mm (1 inch) wide webbing,
Compatible with polyester and nylon webbing.
Not compatible with 100% Dyneema webbing, Vectran and threaded tubular or Kill Bill. Our Moonwalk  - 50% polyester/Dyneema - slippage at 9kN on some random tests, we do not recommend the use of it for the Moonwalk.

Warranty reminder : 
Your LineGrip is lifetime warranty on material or assembly defect.
The warranty isn't applicable on the rubber coating and leash. Subject to reasonable use. 

Made in germany

More infos :

Attention !

The LineGrip is for tensioning slacklines and is not an anchor or a weblock !
It is not designed for rope use and cannot be considered as PPE (personal protective equipment).
Important : Please always read and remember the safety instructions and warnings on the back of this manual.
Temperatures and environmental factors may compromise the functionality of the LineGrip. Be aware that high temperatures (>30°C) may favor slipping !


Slacklining and particularly Highlining are sports having no legal framework or norms concerning the gear or the setup.

Consequently we cannot warranty our gear for Highlining.
Our products are tested by independent labs (Apave) and inside of our company via a process evolving with practice.

The results of those tests have no legal values, they aim to ensure the safety and comfort of using our equipment.

It is the responsibility of the slackliner to choose the right gear with adequate resistance and to have the necessary experience to adapt his installation to his practice.


  • Don't rig your slackline accross a path,a road or any crossing
  • Don't rig your slackline higher than 2m
  • Ride on a grassy or soft ground, without roots or rocks
  • Always backup your setup
  • Never use ratchets for highlining
  • Never use urban furniture as anchor point

This equipement is absolutely not made for highlining. Find more information on our website

Items cannot be considered as PPE (personal protective equipment)

Customers who bought this product also bought:

30 other products in the same category: